Upcoming events

Switch to Calendar View

• Aggregates Testing Technician Level 1

  • Start
    03 Apr 2026
  •  
    9:00 AM
  • End
    04 Apr 2026
  •  
    2:00 PM
  • Location
    Martin Marietta - 5159 North El Mirage, Litchfield Park, AZ
  • Spaces left
    2
  • Registered
    9 registrants

  
  

  This is a two day program that includes two sessions: the classroom review session on Friday morning and hands-on practice during the afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-44).

  An Aggregate Testing Technician - Level 1 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates.  It is the responsibility of the Technician to obtain copy of the ASTM standards required for this program.  Please note, Certification is NOT TRAINING.  It is the responsibility of the Technician to obtain adequate training and exposure to the practices before coming to take the exam.

  Scope and Knowledge

   The program requires a working knowledge of the following AASHTO/ASTM Standards:

  • T2 / D75 - Sampling Aggregates
  • T248 / C702 - Reducing Samples of Aggregate to Testing Size
  • T11 / C117 - Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
  • T27 / C136 - Sieve Analysis of Fine and Coarse Aggregates
  • T85 / C127 - Specific Gravity and Absorption of Coarse Aggregate
  • T84 / C128 - Specific Gravity and Absorption of Fine Aggregate
  • T255 / C566 - Total Moisture Content of Aggregate by Drying
  • T21 / C40 - Organic Impurities in Fine Aggregate for Concrete
    

  Certification Requirements

  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.

  The two-hour written examination is "open book" and consists of approximately 100 multiple choice questions. There are 8 to 12 questions on each of the Standards. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required standards, and
  2. A minimum score of 70% overall.

  The performance examination is closed-book and requires actual demonstration of the required Standards. The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Recertification is necessary every five years, and requires successful completion of both the written and performance examinations.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  
  

  Show details
• Tucson ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    10 Apr 2026
  •  
    8:00 AM
  • End
    11 Apr 2026
  •  
    12:30 PM
  • Location
    CalPortland 6601 N. Casa Grande Hwy. Tucson, AZ, 85743
  • Spaces left
    0

  Registration is closed

   
  

  This is a two day program conducted in Tucson at the CalPortland Plant located at:   6601 N. Casa Grande Hwy. Tucson, AZ   Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• ACI Aggregate/Soils Base Testing Technician

  • Start
    10 Apr 2026
  •  
    2:00 PM
  • End
    11 Apr 2026
  •  
    12:00 PM
  • Location
    WSP - 3630 E. Wier Avenue Phoenix, AZ 85040
  • Spaces left
    2

  Register

  Aggregate/Soils Base Testing Technician

  Definition:

  An Aggregate Base Testing Technician—ASTM Methods is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates and soils using ASTM standards.

  
  

  Scope and Knowledge:

  This program requires demonstration of the knowledge covered on the Job Task Analysis (JTA):
  

  JTA for ACI Aggregate Base Testing Technician—ASTM Methods Certification

  The JTA is a detailed list of specific points of knowledge that may be included in the examinations for this ACI Certification program. ACI urges candidates to use the JTA to prepare for the certification exams.

  
  

  The program requires a working knowledge of the following ASTM standards:

  • ASTM D75/D75M-19—Standard Practice for Sampling Aggregates
  • ASTM C702/C702M-18—Standard Test Method for Reducing Samples of Aggregate to Testing Size
  • ASTM D4318-17—Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D7928-21e1—Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
  • ASTM D2216-19—Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
  • ASTM D1557-12(21)—Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/ m3))
  • ASTM D698-12(21)—Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/ m3))

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:
  

  1. Both the written and performance examinations for Aggregate Base Testing Technician—ASTM Methods must be passed within a one-year period.
  2. A candidate who is certified as Aggregate Base Testing Technician—AASHTO Methods may become certified as Aggregate Base Testing Technician—ASTM Methods by passing the written examination (only) for Aggregate Base Testing Technician—ASTM Methods within one year of having achieved the Aggregate Base Testing Technician—AASHTO Methods certification.

  
  

  The two-hour written examination is open-book and consists of approximately 75 multiple-choice questions. There are 8 to 12 questions on each of the standards.

  To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required standards, and
  2. A minimum score of 70% overall.

  
  

  The performance examination is closed-book and requires actual demonstration of the required standards. The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Certification is valid for a period of five years from the date of successfully completing all requirements.

  Recertification requires successful completion of both the written and performance examinations.

  A candidate who is certified as Aggregate Base Testing Technician—AASHTO Methods may become certified as Aggregate Base Testing Technician—ASTM Methods by passing the written examination (only) for Aggregate Base Testing Technician—ASTM Methods within one year of having achieved the Aggregate Base Testing Technician— AASHTO Methods certification.

  
  

  
  

  The performance examination is closed-book and requires actual demonstration of the required standards. The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Certification is valid for a period of five years from the date of successfully completing all requirements.

  Recertification requires successful completion of both the written and performance examinations.

  
  

  Show details
• AZ ACI & CCAA invite you to learn more about our Concrete Flatwork Performance Exam

  • When
    15 Apr 2026
  •  
    11:00 AM - 1:00 PM
  • Location
    The Majestic Theater 1140 E Baseline Road Tempe, AZ 85383

  Register

  
  

  
  Please join us for an in-depth look at the benefits and value of having a CERTIFIED Flatwork crew for your company.  Michael Morrison with ACI International will present on the New to ARIZONA Chapter Flatwork Associate exam that is Performance Based and does NOT include a written exam.  This will be an opportunity for the contractors to hear more about how their crews can be certified who may not have the work hours, have difficulty taking written exams or who have language barriers that can and do interfere with understanding the written exam format.  This allows them to perform the work as directed and be graded on actual performance of the standards and methods of the trade/craft.  Having Certified personnel on many projects is required and up until now, it has been a challenge and expense to get some of your best crew members certified! 

  WHERE IS ACI FLATWORK CERTIFICATION REQUIRED?

  When construction projects reference ACI Specifications for Concrete Construction (ACI 301) as part of their construction documents, ACI Flatwork Finisher or Advanced Concrete Flatwork Finisher certification becomes required. 

  According to ACI 301-20:

  5.3.4.1. Finisher qualifications - Unless otherwise specified, at least one finisher or finishing supervisor shall be a certified ACI Flatwork Finisher or Advanced Concrete Flatwork Finisher.

  Come hear how we can help and work together to make this less difficult!  Below are the finisher programs offered by ACI.  

  A Concrete Flatwork Associate (formerly Concrete Flatwork Technician) is a person who has demonstrated knowledge (via a written examination) on proper procedures to place, consolidate, finish, edge, joint, cure and protect concrete flatwork.

  An Advanced Concrete Flatwork Finisher(formerly Concrete Flatwork Finisher and Technician) is a craftsman who has demonstrated the knowledge AND skills and/or experience necessary to place, consolidate, finish, edge, joint, cure and protect concrete flatwork.

  A Concrete Flatwork Finisher (formerly Concrete Flatwork Tradesman) is a craftsman who has demonstrated the skills(via a hands-on performance exam) AND experience necessary to place, consolidate, finish, edge, joint, cure and protect concrete flatwork.

  
  

  Certification is valid for a period of five years from the date of successfully completing all requirements.

  
  

  *Finishing experience includes concrete placement, consolidation, jointing, curing and protection, finishing, form setting, prep work, rubbing, patching, and saw cutting. Verification of the work experience by the candidate's employer(s) is required. 
  
  **During the performance examination, each examinee must place, consolidate, finish, edge, joint, begin curing, and provide initial protection for a concrete slab. The examiner will observe and evaluate the techniques used and record passing or failing grades on the various individual procedures.

  
  

  About our Speaker: 

  Michael Morrison

  Director, Certification Program Development & ACI Resource Centers

  Morrison leads the development of potential new certification programs and assists ACI subcommittees with current Board-approved programs. He serves as the liaison with development facilitators and works closely with the ACI certification team and the local sponsoring groups in the development, review, training, delivery, and promotion of the programs to market. He also serves as ACI’s certification representative to standards development organizations. Additionally, Morrison also oversees the operations of ACI’s three Resource Centers.

  He has nearly 30 years of experience in project management related to construction materials testing and evaluation, field inspection, condition surveys, and development and execution of training programs within the construction industry. He previously served as Principal & Laboratory Manager for CTLGroup, Skokie, IL. He is highly skilled at teaching and training ACI certification courses and numerous other concrete-related seminars and programs.

  He is an active member of ASTM International and past member of the Executive Committees of C09, Concrete and Aggregates, as well as C01, Cement, Lime and Gypsum. He is past Chairman of C09.22, Materials Applied to Concrete Surfaces, and C01.27, Strength. He is a Fellow of ACI, ASTM and The Institute Concrete Technology.

  
  

  
  

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    17 Apr 2026
  •  
    7:00 AM
  • End
    18 Apr 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    0

  Join waitlist

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• ACI Concrete Masonry Field Testing Technician Certification and Written/Performance Retest

  • Start
    24 Apr 2026
  •  
    2:00 PM
  • End
    25 Apr 2026
  •  
    12:00 PM
  • Location
    Terracon 4685 S. Ash #G17 Tempe, AZ 85282
  • Spaces left
    2

  Register

  
  

  This is a two day program that includes a 3 to 4 hour review session on Friday afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program.  For those needing a re-test, you will attend the Saturday morning exam session only at 7:00 a.m.

  Registger on-line here by clicking on the "Register" button at the bottom left side of this page.
  

  A Masonry Field Testing Technician is an individual who has demonstrated the knowledge and ability to perform sample preparation and testing of masonry construction-related materials—including materials for brick, structural clay tile, concrete masonry units, prisms, mortars, and grouts—in the field.

  Scope and Knowledge:
  The program requires a working knowledge of field procedures selected from the following ASTM test methods and practices:  Obtaining copies of the ASTM Standards is the responsibility of the technician taking the exam session.

  • C67—Sampling and Testing Brick and Structural Clay Tile
  • C140/C140M—Sampling and Testing Concrete Masonry Units and Related Units
  • C780 and C780 Annex—Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • C1019—Sampling and Testing Grout
  • C1314—Compressive Strength of Masonry Prisms
    

  This program requires demonstration of the knowledge and hands-on skills covered on the Job Task Analysis (JTA):

  JTA for ACI Masonry Field Testing Technician Certification

  The JTA is a detailed list of specific points of knowledge and skills that may be included in the examinations for this ACI Certification program. ACI urges candidates to use the JTA to prepare for the certification exams.
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of approximately 60 multiple-choice questions. There are between 8 and 12 questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also closed-book and requires actual demonstration of select field procedures described in ASTM test methods C140/C140M, C780, and C1019. The examinee is judged on his/her ability to correctly perform (or describe, where allowed) required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examinations.    

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• FLAGSTAFF ACI Concrete Field Testing Technician

  • When
    01 May 2026
  •  
    7:30 AM - 5:00 PM
  • Location
    ADOT Flagstaff Navajo Training Room, 1959 S. Woodlands Village Blvd. , Flagstaff, AZ 86001
  • Spaces left
    6

  Register

  
  

  This is a one day accelerated program in FLAGSTAFF that includes classroom review, limited hands-on practice, and the written and performance exams. The size of this session is limited and it is only recommended for those with extensive experience or prior training.

  The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-1).

  Register on-line here by clicking on the "Register" button at the bottom left side of this page.

  A Concrete Field Testing Technician - Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  

  
  Scope and Knowledge

  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M - Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172 - Sampling Freshly Mixed Concrete
  • C143/C143M - Slump of Hydraulic-Cement Concrete
  • C138/C138M - Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231 - Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M - Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M - Making and Curing Concrete Test Specimens in the Field

  
  

  
  Certification Requirements

  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.

  The one-hour written examination is "closed book" and consists of fifty-five multiple choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172 (sampling). The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Recertification is necessary every five years, and requires successful completion of both the written and performance examinations.
  

  Click here for more information on this certification program (opens new window).

  Show details
• ACI Concrete Masonry Laboratory Testing Technician Certification and Written/Performance Retest

  • Start
    08 May 2026
  •  
    2:00 PM
  • End
    09 May 2026
  •  
    12:00 PM
  • Location
    Terracon - 4665 S Ash #G17, Tempe, 85282
  • Spaces left
    1

  Register

  
  

  This is a two day program that includes a 3 hour review session on Friday afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program.  For those needing a re-test, you will attend the Saturday morning exam session only at 7:00 a.m. 

  Registger on-line here by clicking on the "Register" button at the bottom left side of this page.
  

  A Masonry Laboratory Testing Technician is an individual who has demonstrated the knowledge and ability to perform laboratory procedures required for preparation and testing of masonry construction-related materials including brick, structural clay tile, concrete masonry units, prisms, mortars, and grouts. 
  

  Scope and Knowledge:
  The program requires a working knowledge of laboratory procedures selected from the following ASTM test methods and practices:  Obtaining copies of the ASTM standards is the responsibility of the technician.

  • C90—Loadbearing Concrete Masonry Units
  • C140/C140M—Sampling and Testing Concrete Masonry Units and Related Units
  • C270—Mortar for Unit Masonry
  • C780 and C780 Annex—Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • C1019—Sampling and Testing Grout
  • C1314—Compressive Strength of Masonry Prisms
  • C1552—Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
    

  This program requires demonstration of the knowledge and hands-on skills covered on the Job Task Analysis (JTA):

  JTA for ACI Masonry Laboratory Testing Technician Certification

  The JTA is a detailed list of specific points of knowledge and skills that may be included in the examinations for this ACI Certification program. ACI urges candidates to use the JTA to prepare for the certification exams.
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:
  

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-and-a-half hour written examination is open-book and consists of approximately 70 multiple-choice questions. There are between 8 and 12 questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is closed-book and requires actual demonstration of select field procedures described in ASTM test methods C140/C140M, C780, C1019, C1314, and C1552. The examinee is judged on his/her ability to correctly perform (or describe, where allowed) required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examinations.    

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    15 May 2026
  •  
    7:00 AM
  • End
    16 May 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    13

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• ACI Concrete Strength Testing Technician Certification and Written/Performance Retest

  • Start
    15 May 2026
  •  
    3:30 PM
  • End
    16 May 2026
  •  
    12:00 PM
  • Location
    Terracon 4665 S Ash #G17 Tempe, AZ 85282
  • Spaces left
    0

  Registration is closed

  
  

  This is a two day program that includes a 2 to 4 hour review session on Friday afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-19).  For those needing a re-test, you will attend the Saturday morning exam session only.  

  Registger on-line here by clicking on the "Register" button at the bottom left side of this page.

  
  A Concrete Strength Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of four basic laboratory procedures related to the determination of concrete compressive and flexural strength.
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM practices and test methods:  You are responsible for obtaining the ASTM standards for study purposes.  They are no longer printed in the study manual.

  • C617/C617M—Capping Cylindrical Concrete Specimens
  • C1231/C1231M—Unbonded Caps for Concrete Cylinders
  • C39/C39M—Compressive Strength of Cylindrical Concrete Specimens
  • C78/C78M—Flexural Strength of Concrete
    

  Job-task analysis (JTA) for ACI Certification of Concrete Strength Testing Technician

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of approximately 40 multiple-choice questions. There are at least eight questions on each of the practices and test methods. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required practices and test methods, and
  2. A minimum score of 70% overall.
     

  The performance examination is also closed-book and requires actual demonstration of the required practices and test methods. The examinee is judged on his/her ability to correctly perform all of the required steps for each procedure. Recertification is necessary every five years* and requires successful completion of both the written and performance examinations.
  
  *NOTE: Certifications initiated prior to January 1, 2008, were granted certification for six years. Due to a policy change, however, individuals initiating the certification process January 1, 2008, and later will be certified for five years.  Proper PPE must be worn during exams and review sessions.  Face protection, safety glasses, long pants/sleeve shirt, closed toe shoes and gloves.  You many not be denied your exam if not in proper attire.  If you are feeling sick, please do not come and reschedule with the ACI office.

      

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• ACI Written Retest session for various programs

  • When
    16 May 2026
  •  
    9:00 AM - 11:30 AM
  • Location
    Terracon 4665 S Ash #G17, Tempe, AZ 85282
  • Spaces left
    5

  Register

  WRITTEN RETEST SESSION FOR VARIOUS PROGRAMS.  

  
  

  If you have taken a certification class and have been notified that you did not pass the written exam this session is for you.  Please select the correct exam you need.  

  We limit seats for this session to 15.

  Show details
• Aggregates Testing Technician Level 1

  • Start
    05 Jun 2026
  •  
    9:00 AM
  • End
    06 Jun 2026
  •  
    2:00 PM
  • Location
    Martin Marietta - 5159 North El Mirage, Litchfield Park, AZ
  • Spaces left
    8
  • Registered
    3 registrants

  Register

  
  

  This is a two day program that includes two sessions: the classroom review session on Friday morning and hands-on practice during the afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-44).

  An Aggregate Testing Technician - Level 1 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates.  It is the responsibility of the Technician to obtain copy of the ASTM standards required for this program.  Please note, Certification is NOT TRAINING.  It is the responsibility of the Technician to obtain adequate training and exposure to the practices before coming to take the exam.

  Scope and Knowledge

   The program requires a working knowledge of the following AASHTO/ASTM Standards:

  • T2 / D75 - Sampling Aggregates
  • T248 / C702 - Reducing Samples of Aggregate to Testing Size
  • T11 / C117 - Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
  • T27 / C136 - Sieve Analysis of Fine and Coarse Aggregates
  • T85 / C127 - Specific Gravity and Absorption of Coarse Aggregate
  • T84 / C128 - Specific Gravity and Absorption of Fine Aggregate
  • T255 / C566 - Total Moisture Content of Aggregate by Drying
  • T21 / C40 - Organic Impurities in Fine Aggregate for Concrete
    

  Certification Requirements

  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.

  The two-hour written examination is "open book" and consists of approximately 100 multiple choice questions. There are 8 to 12 questions on each of the Standards. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required standards, and
  2. A minimum score of 70% overall.

  The performance examination is closed-book and requires actual demonstration of the required Standards. The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Recertification is necessary every five years, and requires successful completion of both the written and performance examinations.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  
  

  Show details
• Tucson ACI Concrete Strength Testing Technician Certification and Written/Performance Retest

  • Start
    05 Jun 2026
  •  
    3:30 PM
  • End
    06 Jun 2026
  •  
    12:00 PM
  • Location
    Western Technologies - 3480 S Dodge Tucson, AZ 85713
  • Spaces left
    7

  Register

  
  

  This is a two day program that includes a 2 to 4 hour review session on Friday afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-19).  For those needing a re-test, you will attend the Saturday morning exam session only at 8:00 a.m..   Please note, Certification IS NOT TRAINING.  It is the responsibility of the technician to obtain proper training and experience before taking these exams.  

  Register on-line here by clicking on the "Register" button at the bottom left side of this page.

  
  A Concrete Strength Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of four basic laboratory procedures related to the determination of concrete compressive and flexural strength.
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM practices and test methods:  You are responsible for obtaining the ASTM standards for study purposes.  They are no longer printed in the study manual.

  • C617/C617M—Capping Cylindrical Concrete Specimens
  • C1231/C1231M—Unbonded Caps for Concrete Cylinders
  • C39/C39M—Compressive Strength of Cylindrical Concrete Specimens
  • C78/C78M—Flexural Strength of Concrete
    

  Job-task analysis (JTA) for ACI Certification of Concrete Strength Testing Technician

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of approximately 40 multiple-choice questions. There are at least eight questions on each of the practices and test methods. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required practices and test methods, and
  2. A minimum score of 70% overall.
     

  The performance examination is also closed-book and requires actual demonstration of the required practices and test methods. The examinee is judged on his/her ability to correctly perform all of the required steps for each procedure. Recertification is necessary every five years* and requires successful completion of both the written and performance examinations.
  
  *NOTE: Certifications initiated prior to January 1, 2008, were granted certification for six years. Due to a policy change, however, individuals initiating the certification process January 1, 2008, and later will be certified for five years.  Proper PPE must be worn during exams and review sessions.  Face protection, safety glasses, long pants/sleeve shirt, closed toe shoes and gloves.  You many not be denied your exam if not in proper attire.  If you are feeling sick, please do not come and reschedule with the ACI office.

      

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• Tucson Written Retest Session for Concrete Field Testing Technician

  • When
    06 Jun 2026
  •  
    9:30 AM - 11:00 AM
  • Location
    Western Technologies - 3480 S Dodge Tucson, AZ 85713
  • Spaces left
    7

  Register

  WRITTEN RETEST SESSION FOR ACI Concrete Field Testing Technician Grade 1

  This is a written retest ONLY for those who have taken the exam within the last year and have been notified by ACI that they did not pass the exam.  There is NO review or practice given.  This is a one hour exam only.  For those needing the practical retest, you must register for the exam during the regular Field Testing Exam sessions.  You must bring an ID, pencil, and calculator for this exam.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    19 Jun 2026
  •  
    7:00 AM
  • End
    20 Jun 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    33

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• AZ ACI - Invites you to the 2026 BOWLING Tournament

  • When
    26 Jun 2026
  •  
    11:30 AM - 2:00 PM
  • Location
    9027 E Vía Linda, Scottsdale, AZ 85258
  • Spaces left
    192

  Register

  

  
  

  Register NOW for BOWLING!!   
  

  Please plan to join us for our MOST popular Event of the year - BOWLING!!!!

  If you don't bowl, you can sign up to join us for networking, food and drinks!   MANY Prizes, games, food, drinks, and lots of fun will be had by ALL!  Prizes for Most Gutter Balls, Most Strikes and Highest Scoring Team.  Sign up your Team and come join us!!  This Event sells out, so sign up early to reserve your spot!  Teams can wear uniforms for the chance to Win $100 for each person on the team who wins BEST Dressed!

  Friday June 26th at BOWLMOR Lanes 9027 E. Via Linda - Scottsdale, AZ 85258
  

  
  

  Registration will begin at 11:15 with Bowling from 12:00-2:00 

  We depend on our Sponsors make this our BEST event, Please consider a sponsor for $200!  Questions - contact Beth at azaci@outlook.com

    

  2025 Team Winner:  Coreslab Structures

  2025 Team Uniform Winners:  Martin Marietta

  Show details
• Tucson ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    10 Jul 2026
  •  
    8:00 AM
  • End
    11 Jul 2026
  •  
    12:30 PM
  • Location
    CalPortland 6601 N. Casa Grande Hwy. Tucson, AZ, 85743
  • Spaces left
    9

  Register

   
  

  This is a two day program conducted in Tucson at the CalPortland Plant located at:   6601 N. Casa Grande Hwy. Tucson, AZ   Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    17 Jul 2026
  •  
    7:00 AM
  • End
    18 Jul 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    40

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• ACI Concrete Strength Testing Technician Certification and Written/Performance Retest

  • Start
    17 Jul 2026
  •  
    3:30 PM
  • End
    18 Jul 2026
  •  
    12:00 PM
  • Location
    Terracon 4665 S Ash #G17 Tempe, AZ 85282
  • Spaces left
    3

  Register

  
  

  This is a two day program that includes a 2 to 4 hour review session on Friday afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-19).  For those needing a re-test, you will attend the Saturday morning exam session only.  

  Registger on-line here by clicking on the "Register" button at the bottom left side of this page.

  
  A Concrete Strength Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of four basic laboratory procedures related to the determination of concrete compressive and flexural strength.
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM practices and test methods:  You are responsible for obtaining the ASTM standards for study purposes.  They are no longer printed in the study manual.

  • C617/C617M—Capping Cylindrical Concrete Specimens
  • C1231/C1231M—Unbonded Caps for Concrete Cylinders
  • C39/C39M—Compressive Strength of Cylindrical Concrete Specimens
  • C78/C78M—Flexural Strength of Concrete
    

  Job-task analysis (JTA) for ACI Certification of Concrete Strength Testing Technician

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of approximately 40 multiple-choice questions. There are at least eight questions on each of the practices and test methods. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required practices and test methods, and
  2. A minimum score of 70% overall.
     

  The performance examination is also closed-book and requires actual demonstration of the required practices and test methods. The examinee is judged on his/her ability to correctly perform all of the required steps for each procedure. Recertification is necessary every five years* and requires successful completion of both the written and performance examinations.
  
  *NOTE: Certifications initiated prior to January 1, 2008, were granted certification for six years. Due to a policy change, however, individuals initiating the certification process January 1, 2008, and later will be certified for five years.  Proper PPE must be worn during exams and review sessions.  Face protection, safety glasses, long pants/sleeve shirt, closed toe shoes and gloves.  You many not be denied your exam if not in proper attire.  If you are feeling sick, please do not come and reschedule with the ACI office.

      

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• ACI Written Retest session for various programs

  • When
    18 Jul 2026
  •  
    9:00 AM - 11:30 AM
  • Location
    Terracon 4665 S Ash #G17, Tempe, AZ 85282
  • Spaces left
    17

  Register

  WRITTEN RETEST SESSION FOR VARIOUS PROGRAMS.  

  
  

  If you have taken a certification class and have been notified that you did not pass the written exam this session is for you.  Please select the correct exam you need.  

  We limit seats for this session to 15.

  Show details
• Aggregates Testing Technician Level 1

  • Start
    07 Aug 2026
  •  
    9:00 AM
  • End
    08 Aug 2026
  •  
    2:00 PM
  • Location
    Martin Marietta - 5159 North El Mirage, Litchfield Park, AZ
  • Spaces left
    10
  • Registered
    Be the first

  Register

  
  

  This is a two day program that includes two sessions: the classroom review session on Friday morning and hands-on practice during the afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-44).

  An Aggregate Testing Technician - Level 1 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates.  It is the responsibility of the Technician to obtain copy of the ASTM standards required for this program.  Please note, Certification is NOT TRAINING.  It is the responsibility of the Technician to obtain adequate training and exposure to the practices before coming to take the exam.

  Scope and Knowledge

   The program requires a working knowledge of the following AASHTO/ASTM Standards:

  • T2 / D75 - Sampling Aggregates
  • T248 / C702 - Reducing Samples of Aggregate to Testing Size
  • T11 / C117 - Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
  • T27 / C136 - Sieve Analysis of Fine and Coarse Aggregates
  • T85 / C127 - Specific Gravity and Absorption of Coarse Aggregate
  • T84 / C128 - Specific Gravity and Absorption of Fine Aggregate
  • T255 / C566 - Total Moisture Content of Aggregate by Drying
  • T21 / C40 - Organic Impurities in Fine Aggregate for Concrete
    

  Certification Requirements

  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.

  The two-hour written examination is "open book" and consists of approximately 100 multiple choice questions. There are 8 to 12 questions on each of the Standards. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required standards, and
  2. A minimum score of 70% overall.

  The performance examination is closed-book and requires actual demonstration of the required Standards. The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Recertification is necessary every five years, and requires successful completion of both the written and performance examinations.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  
  

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    14 Aug 2026
  •  
    7:00 AM
  • End
    15 Aug 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    45

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• Tucson ACI Concrete Strength Testing Technician Certification and Written/Performance Retest

  • Start
    11 Sep 2026
  •  
    3:30 PM
  • End
    12 Sep 2026
  •  
    12:00 PM
  • Location
    Western Technologies - 3480 S Dodge Tucson, AZ 85713
  • Spaces left
    15

  Register

  
  

  This is a two day program that includes a 2 to 4 hour review session on Friday afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-19).  For those needing a re-test, you will attend the Saturday morning exam session only at 8:00 a.m..   Please note, Certification IS NOT TRAINING.  It is the responsibility of the technician to obtain proper training and experience before taking these exams.  

  Register on-line here by clicking on the "Register" button at the bottom left side of this page.

  
  A Concrete Strength Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of four basic laboratory procedures related to the determination of concrete compressive and flexural strength.
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM practices and test methods:  You are responsible for obtaining the ASTM standards for study purposes.  They are no longer printed in the study manual.

  • C617/C617M—Capping Cylindrical Concrete Specimens
  • C1231/C1231M—Unbonded Caps for Concrete Cylinders
  • C39/C39M—Compressive Strength of Cylindrical Concrete Specimens
  • C78/C78M—Flexural Strength of Concrete
    

  Job-task analysis (JTA) for ACI Certification of Concrete Strength Testing Technician

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of approximately 40 multiple-choice questions. There are at least eight questions on each of the practices and test methods. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required practices and test methods, and
  2. A minimum score of 70% overall.
     

  The performance examination is also closed-book and requires actual demonstration of the required practices and test methods. The examinee is judged on his/her ability to correctly perform all of the required steps for each procedure. Recertification is necessary every five years* and requires successful completion of both the written and performance examinations.
  
  *NOTE: Certifications initiated prior to January 1, 2008, were granted certification for six years. Due to a policy change, however, individuals initiating the certification process January 1, 2008, and later will be certified for five years.  Proper PPE must be worn during exams and review sessions.  Face protection, safety glasses, long pants/sleeve shirt, closed toe shoes and gloves.  You many not be denied your exam if not in proper attire.  If you are feeling sick, please do not come and reschedule with the ACI office.

      

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• Tucson Written Retest Session for Concrete Field Testing Technician

  • When
    12 Sep 2026
  •  
    9:30 AM - 11:00 AM
  • Location
    Western Technologies - 3480 S Dodge Tucson, AZ 85713
  • Spaces left
    10

  Register

  WRITTEN RETEST SESSION FOR ACI Concrete Field Testing Technician Grade 1

  This is a written retest ONLY for those who have taken the exam within the last year and have been notified by ACI that they did not pass the exam.  There is NO review or practice given.  This is a one hour exam only.  For those needing the practical retest, you must register for the exam during the regular Field Testing Exam sessions.  You must bring an ID, pencil, and calculator for this exam.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    18 Sep 2026
  •  
    7:00 AM
  • End
    19 Sep 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    45

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• Aggregates Testing Technician Level 1

  • When
    03 Oct 2026
  •  
    9:00 AM - 2:00 PM
  • Location
    Martin Marietta - 5159 North El Mirage, Litchfield Park, AZ
  • Spaces left
    11
  • Registered
    Be the first

  Register

  
  

  This is a two day program that includes two sessions: the classroom review session on Friday morning and hands-on practice during the afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-44).

  An Aggregate Testing Technician - Level 1 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates.  It is the responsibility of the Technician to obtain copy of the ASTM standards required for this program.  Please note, Certification is NOT TRAINING.  It is the responsibility of the Technician to obtain adequate training and exposure to the practices before coming to take the exam.

  Scope and Knowledge

   The program requires a working knowledge of the following AASHTO/ASTM Standards:

  • T2 / D75 - Sampling Aggregates
  • T248 / C702 - Reducing Samples of Aggregate to Testing Size
  • T11 / C117 - Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
  • T27 / C136 - Sieve Analysis of Fine and Coarse Aggregates
  • T85 / C127 - Specific Gravity and Absorption of Coarse Aggregate
  • T84 / C128 - Specific Gravity and Absorption of Fine Aggregate
  • T255 / C566 - Total Moisture Content of Aggregate by Drying
  • T21 / C40 - Organic Impurities in Fine Aggregate for Concrete
    

  Certification Requirements

  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.

  The two-hour written examination is "open book" and consists of approximately 100 multiple choice questions. There are 8 to 12 questions on each of the Standards. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required standards, and
  2. A minimum score of 70% overall.

  The performance examination is closed-book and requires actual demonstration of the required Standards. The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Recertification is necessary every five years, and requires successful completion of both the written and performance examinations.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  
  

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    16 Oct 2026
  •  
    7:00 AM
  • End
    17 Oct 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    48

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• Tucson ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    23 Oct 2026
  •  
    8:00 AM
  • End
    24 Oct 2026
  •  
    12:30 PM
  • Location
    CalPortland 6601 N. Casa Grande Hwy. Tucson, AZ, 85743
  • Spaces left
    12

  Register

   
  

  This is a two day program conducted in Tucson at the CalPortland Plant located at:   6601 N. Casa Grande Hwy. Tucson, AZ   Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    13 Nov 2026
  •  
    7:00 AM
  • End
    14 Nov 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    46

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details
• ACI Concrete Strength Testing Technician Certification and Written/Performance Retest

  • Start
    20 Nov 2026
  •  
    3:30 PM
  • End
    21 Nov 2026
  •  
    12:00 PM
  • Location
    Terracon 4665 S Ash #G17 Tempe, AZ 85282
  • Spaces left
    21

  Register

  
  

  This is a two day program that includes a 2 to 4 hour review session on Friday afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-19).  For those needing a re-test, you will attend the Saturday morning exam session only.  

  Registger on-line here by clicking on the "Register" button at the bottom left side of this page.

  
  A Concrete Strength Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of four basic laboratory procedures related to the determination of concrete compressive and flexural strength.
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM practices and test methods:  You are responsible for obtaining the ASTM standards for study purposes.  They are no longer printed in the study manual.

  • C617/C617M—Capping Cylindrical Concrete Specimens
  • C1231/C1231M—Unbonded Caps for Concrete Cylinders
  • C39/C39M—Compressive Strength of Cylindrical Concrete Specimens
  • C78/C78M—Flexural Strength of Concrete
    

  Job-task analysis (JTA) for ACI Certification of Concrete Strength Testing Technician

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of approximately 40 multiple-choice questions. There are at least eight questions on each of the practices and test methods. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required practices and test methods, and
  2. A minimum score of 70% overall.
     

  The performance examination is also closed-book and requires actual demonstration of the required practices and test methods. The examinee is judged on his/her ability to correctly perform all of the required steps for each procedure. Recertification is necessary every five years* and requires successful completion of both the written and performance examinations.
  
  *NOTE: Certifications initiated prior to January 1, 2008, were granted certification for six years. Due to a policy change, however, individuals initiating the certification process January 1, 2008, and later will be certified for five years.  Proper PPE must be worn during exams and review sessions.  Face protection, safety glasses, long pants/sleeve shirt, closed toe shoes and gloves.  You many not be denied your exam if not in proper attire.  If you are feeling sick, please do not come and reschedule with the ACI office.

      

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter
  

  Show details
• Aggregates Testing Technician Level 1

  • Start
    04 Dec 2026
  •  
    9:00 AM
  • End
    05 Dec 2026
  •  
    2:00 PM
  • Location
    Martin Marietta - 5159 North El Mirage, Litchfield Park, AZ
  • Spaces left
    11
  • Registered
    Be the first

  Register

  
  

  This is a two day program that includes two sessions: the classroom review session on Friday morning and hands-on practice during the afternoon and the written and performance exams on Saturday morning. The package price includes the review, the exams, all certification fees and the ACI workbook for this program (CP-44).

  An Aggregate Testing Technician - Level 1 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates.  It is the responsibility of the Technician to obtain copy of the ASTM standards required for this program.  Please note, Certification is NOT TRAINING.  It is the responsibility of the Technician to obtain adequate training and exposure to the practices before coming to take the exam.

  Scope and Knowledge

   The program requires a working knowledge of the following AASHTO/ASTM Standards:

  • T2 / D75 - Sampling Aggregates
  • T248 / C702 - Reducing Samples of Aggregate to Testing Size
  • T11 / C117 - Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
  • T27 / C136 - Sieve Analysis of Fine and Coarse Aggregates
  • T85 / C127 - Specific Gravity and Absorption of Coarse Aggregate
  • T84 / C128 - Specific Gravity and Absorption of Fine Aggregate
  • T255 / C566 - Total Moisture Content of Aggregate by Drying
  • T21 / C40 - Organic Impurities in Fine Aggregate for Concrete
    

  Certification Requirements

  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination, and
  2. Successful completion of the ACI performance examination.

  The two-hour written examination is "open book" and consists of approximately 100 multiple choice questions. There are 8 to 12 questions on each of the Standards. To pass the written examination, both of the following conditions must be met:

  1. At least 60% correct for each of the required standards, and
  2. A minimum score of 70% overall.

  The performance examination is closed-book and requires actual demonstration of the required Standards. The examinee is judged on his/her ability to correctly perform or describe all of the required procedures for each standard.

  Recertification is necessary every five years, and requires successful completion of both the written and performance examinations.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  
  

  Show details
• ACI Concrete Field Testing Technician Grade 1 Certification

  • Start
    11 Dec 2026
  •  
    7:00 AM
  • End
    12 Dec 2026
  •  
    12:30 PM
  • Location
    Sundt Training Center 2630 S 20th Place Phoenix 85034
  • Spaces left
    47

  Register

   
  

  This is a two day program conducted in the Phoenix, Arizona area. Day 1 (Friday) consists of a classroom review session lasting 4 - 6 hours followed by the 60-minute written exam. Day 2 (Saturday) consists of a hands-on practice session followed by the performance (hands-on) exam. The package price includes the review and hands-on practice, the exams, all certification fees and the ACI workbook for this program.

  Register on-line here by clicking on the "Register" button at the bottom left side of this page. 

  A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  It is your responsibility to obtain copies of the ASTM standards for study purposes.  The study book does provide a good understanding of the standards but no longer print them.

  http://www.concrete.org/Portals/0/Files/PDF/JTA-FTT.pdf
  

  Scope and Knowledge:
  The program requires a working knowledge of the following ASTM test methods and practices:

  • C1064/C1064M—Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • C172/C172M—Sampling Freshly Mixed Concrete
  • C143/C143M—Slump of Hydraulic-Cement Concrete
  • C138/C138M—Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • C231/C231M—Air Content of Freshly Mixed Concrete by the Pressure Method
  • C173/C173M—Air Content of Freshly Mixed Concrete by the Volumetric Method
  • C31/C31M—Making and Curing Concrete Test Specimens in the Field

  
  

  Certification Requirements:
  ACI will grant certification only to those applicants who meet both of the following requirements:

  1. A passing grade on the ACI written examination; AND
  2. Successful completion of the ACI performance examination.
     

  The one-hour written examination is closed-book and consists of 55 multiple-choice questions. There are between five and ten questions on each of the ASTM test methods and practices. To pass the written examination, BOTH of the following conditions must be met:

  1. At least 60% correct for each of the required test methods and practices; AND
  2. A minimum score of 70% overall.
     

  The performance examination is also "closed book" and requires actual demonstration of six of the required test methods and practices plus a verbal description of Practice C172/C172M (sampling). The examinee is judged on his/her ability to correctly perform (or describe, where allowed) all of the required steps for each procedure.

  Recertification is necessary every five years and requires successful completion of both the written and performance examination.  Proper PPE is required to attend all sessions.  Face Protection during the Covid virus is mandated inside and during exams, long sleeve shirt, long pants, gloves, closed toe shoes and safety glasses.  You may be denied the exams if you do not have proper safety gear.

  Americans with Disabilities Act (ADA)

  ACI Certification programs are ADA compliant.

  Individuals with disabilities requiring special accommodations must contact the ACI Certification Department for further information on how to proceed. All requested for special accommodations under ADA are handled on a case-by-case basis and must be made allowing enough time for evaluation and appropriate action by ACI.  To contact he contact the ACI Certification Department regarding ADA issues, call 248-848-3790.  This must be done prior to attending any certification program offered by our Chapter

  Show details